Reproducibility of retention indices measurement of alkylbenzenes on crosslinked methyl silicone phase fused silica capillaries

Summary Reproducibility of the Kovats retention indices of alkylbenzenes was studied on conventional “PONA” fused-silica capillary columns coated with crosslinked dimethyl silicone phase, with a film thickness of 0.5 μm. The data were compared with those obtained on conventional OV-101 columns. The tested PONA columns showed reproducible chromatographic properties, capacity ratios and high efficiencies. Having a standard deviation of s=0.03 i.u. of the retention indices on a single column, the column-to-columns differences were found to be up to 0.3 i.u. Higher indices were determined for crosslinked columns, the difference being in most cases about one i.u.     

A comparison of performance of various analytical columns in pharmaceutical analysis: conventional C18 and high throughput C18 zorbax columns

New improved types of analytical columns Zorbax Eclipse XDB-C18 (75 mm x 4.6 mm i.d., 3.5 microm) and Zorbax Eclipse XDB-C18 (50 mm x 4.6 mm i.d., 1.8 microm) have been tested for determination of estradiol (active substance), methylparaben, propylparaben (preservatives) and estrone (degradation product) and compared with the conventional C18 columns (250 mm x 3.0 mm i.d., 5.0 microm). The Zorbax columns differ with their particle size, column length and ODS (octadecylsilica) type as well. Higher flow-rates (up to about 2.5 ml min(-1)) could be applied regardless to back-pressure. The analysis - previously done at 40 degrees C - could be performed even at ambient temperature. Analytical run was shortened to 3.5 min (from 12 min used for the conventional C18 column) with the same or better retention characteristics. System suitability data for all Zorbax columns show the advantages of these columns for the practical use in routine quality control of pharmaceuticals, particularly from the point of view of speed of analysis and solvent consumption.     

Ruthenium(II) complexes with ferrocene-modified arene ligands: synthesis and electrochemistry

A series of arene-ruthenium complexes of the general formula [RuCl₂{η⁶-C₆H₅(CH₂)₂R}L] with R=OH, CH₂OH, OC(O)Fc, CH₂OC(O)Fc (Fc=ferrocenyl) and L=PPh₃, (diphenylphosphino)ferrocene, or bridging 1,1^′-bis(diphenylphosphino)ferrocene, have been synthesized. Two synthetic pathways have been used for these ferrocene-modified arene-ruthenium complexes: (a) esterification of ferrocene carboxylic acid with 2-(cyclohexa-1,4-dienyl)ethanol, followed by condensation with RuCl₃ · nH₂O to afford [RuCl₂{η⁶-C₆H₅(CH₂)₂OC(O)Fc}]₂, and (b) esterification between ferrocene carboxylic acid and [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}L] to give [RuCl₂{η⁶-C₆H₅(CH₂)₃OC(O)Fc}L]. All new compounds have been characterized by NMR and IR spectroscopy as well as by mass spectrometry. The single-crystal X-ray structure analysis of [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] shows that the presence of a CH₂CH₂CH₂OH side-arm allows [RuCl₂{η⁶-C₆H₅(CH₂)₃OH}(PPh₃)] to form an intramolecular hydrogen bond with a chlorine atom. The electrochemical behavior of selected representative compounds has been studied. Complexes with ferrocenylated side arms display the expected cyclic voltammograms, two independent reversible one-electron waves of the Ru(II)/Ru(III) and Fe(II)/Fe(III) redox couples. Introduction of a ferrocenylphosphine onto the ruthenium is reflected by an additonal reversible, one-electron wave due to ferrocene/ferrocenium system which is, however, coupled with the Ru(II)/Ru(III) redox system.     

Capillary ion chromatography

This review summarizes progress in capillary ion chromatography. Theoretical aspects and practical limitations of packed and open tubular capillary columns are considered. Applications of packed and open tubular capillary IC are described. Emerging technologies such chip-scale IC and the use of monolithic columns are discussed.     

Utilization of cleavage of the [1]benzofuro[2,3‐e][1,2,4]triazine ring for the synthesis of oxygen,nitrogen and sulfur derivatives of [1,2,4]triazine

A series of 6‐azacytosines 4a‐4k and 5a‐5c were prepared by nucleophilic cleavage of furan ring of [1]benzofuro[2,3‐e][1,2,4]triazine derivative 1 . Some of them were used for the preparation of derivatives of [1,2,4]triazolo[4,3‐d][1,2,4]triazine ( 6a‐6d ) and tetrazolo[1,5‐d][1,2,4]triazine (7). The reaction of 1 with hydrogen sulfide afforded the corresponding 6‐(2‐hydroxyphenyl)‐2‐phenyl‐5‐thioxo‐4,5‐dihydro‐1,2,4‐tri‐azin‐3(2H)‐one ( 8 ), while with hydrogen selenide 6‐(2‐hydroxyphenyl)‐2‐phenyl‐4,5‐dihydro‐1,2,4‐triazin‐3(2H)‐one ( 9 ) was formed. The prepared compounds were tested for biological activity.     

Antiferromagnetism of poly(3-dodecylthiophene) irradiated by γ-beams

The magnetic properties of poly(3-dodecyl-thiophene) (PDDT) irradiated by -beams have been studied by measuring the magnetic susceptibility and EPR spectra. The irradiated PDDT is characterized, similarly as the non-irradiated one, by an antiferromagnetic course of magnetic susceptibility with a Néel temperature of 237 K. It is suggested that the antiferromagnetic properties of PDDT are caused by transformation of polarons to bipolarons, which takes place at lower temperatures.     

The synthesis of 4‐amino‐3‐(2‐pyridyl)pyrazolo[5,1‐c][1,2,4]triazine and some of its derivatives

A mixture of both geometrical isomers of hydrazones 3a‐3e was obtained by the coupling reactions of pyrazole‐3‐diazonium salts 2a‐2d and benzenediazonium chloride 2e with 2‐pyridylacetonitrile 1 . Hydrazones 3a‐3d were cyclized to the corresponding 4‐amino‐3‐(2‐pyridyl)pyrazolo[5,1‐c][1,2,4]triazines 4a‐4d.     

Bis(cyclopentadienyl)titanium complexes of naphthalene-1,8-dithiolates, biphenyl 2,2'-dithiolates, and related ligands

Titanocene 1,8-dithiolato-naphthalene and titanocene 2,2'-dithiolato biphenyl are produced by the reaction of naphtho[1,8-cd]-1,2-dithiole [or the biphenyl] with titanocene dicarbonyl (Ti(II)) in toluene at room temperature. The pro-ligands 2,7-di(tert-butyl)naphtho[1,8-cd]-1,2-dithiole, 5,6-dihydroacenaphtho[5,6-cd]-1,2-dithiole, 4,5-dithioacephenanthrylene, and 13,14-dithiapicene have been used in similar reactions with titanocene dicarbonyl to investigate the effect of steric bulk and of varying the naphthalene backbone on the final complex. The resulting Cp(2)TiS(2)Ar complexes (Ar = naphthalene) have been shown by temperature-dependent (1)H NMR spectroscopy to exist in solution in an envelope conformation with the six-membered TiS(2)C(3) rings undergoing inversion on the NMR time scale while the similar Cp(2)TiS(2)Ar complexes (Ar = biphenyl, binaphthalene) interconvert more rapidly. Titanocene 2,2'-disulfinato biphenyl has been synthesized by the salt elimination reaction of titanocene dichloride (Ti(IV)) and the disodium salt of biphenyl 2,2'-disulfinic acid. Finally, the effect of using pro-ligands where the sulfur atoms have been mono- or di-oxidized has been studied, and an interesting oxygen elimination reaction is observed for the S=O fragments but not for the SO(2) groups. All complexes have been characterized spectroscopically and seven X-ray structures are reported.     

Synthesis of enantiomerically pure (purin-6-yl)phenylalanines and their nucleosides, a novel type of purine-amino acid conjugates

[Chemical reaction: See text] Enantiomerically or diastereomerically pure 4-(purin-6-yl)phenylalanines, a novel type of stable amino acid-purine conjugates, were synthesized by palladium-catalyzed cross-coupling reactions of protected 4-boronophenylalanines or 4-(trimethylstanyl)phenylalanines with diverse 6-halopurines (9-benzyl-6-halopurines and 9-(tetrahydropyran-2-yl)-6-halopurines as well as acyl- and silyl-protected 6-halopurine ribonucleosides and 2-deoxyribonucleosides). Free purine bases and nucleosides bearing (S)- or (R)-phenylalanine in position 6 were obtained after complete deprotection of the products of cross-coupling reactions. Reactivity trends for both of these cross-coupling and deprotection protocols have been compared in terms of practicability, efficiency, and stereoselectivity.     

Advanced statistical evaluation of the complex formation constants from electrophoretic data II: Diastereomeric ion-pairs of (R,S)-N-(3,5-dinitrobenzoyl)leucine and tert-butylcarbamoylquinine

Intermolecular association and ion-pair formation, respectively, between a cationic chiral selector, viz. o-9-(tert-butylcarbamoyl) quinine (CQN), and the both enantiomers of anionic N-(3,5-dinitrobenzoyl)leucine, (R)-DNB-Leu and (S)-DNB-Leu, were investigated by affinity capillary electrophoresis (ACE). Thus, binding constants of the both diastereomeric ion-pairs, (R) and (S)-DNB-Leu/CQN associates, were determined by different experimental setups and correction of nonlinear effects. A reciprocal setup was employed for the high-affinity (S)-enantiomer, and the experimental mobility data obtained for CQN at variable (S)-DNB-Leu concentrations in the background electrolyte were linearized and evaluated by advanced statistical model. A binding constant of K_S=125.1 l mol⁻¹ was afforded. The constant for the (R)-enantiomer, which is outside the range suitable for direct affinity CE, was obtained from indirect affinity CE utilizing the separation of the DNB-Leu racemate at a single appropriate CQN concentration in the BGE (resolution method) taking advantage of the known constant for the (S)-enantiomer yielding a binding constant of K_R=2.51 l mol⁻¹. Thereby, the so-called “constant time method” was adopted for the required precise measurement of the effective mobilities of the both enantiomers. A combined approach of reciprocal affinity CE with racemic DNB-Leu as additive and the resolution method confirmed the results. The resulting constants evidence excellent enantioselectivity of the tert-butylcarbamoyl derivative of the cinchona alkaloid quinine as chiral selector for N-(3,5-dinitrobenzoyl) derivatives of amino acids.